Citroën Xantia

1. Remove the left lock of a cowl and disconnect from it a driving cable (see Removal and installation of locks of a cowl).
2. Release a cable from intermediate clamps and guides in a motive compartment.
3. Disconnect the opposite end of a cable from a connecting plate in a motive compartment. Remove hummock assembly.

1. Remove the dashboard (see Removal and installation of the dashboard) and assembly of a heater (see the Head of the Cooling system, heating).

2. In interior of the car turn out a fixing bolt and remove the cowl lock latch otpuskaniye lever from an arm of a steering column.

3. In the left part of a motive compartment disconnect the end of a driving cable from a connecting plate.
4. Release a driving cable from guides and intermediate clamps in a motive compartment. Try to remember a route of laying of a cable.
5. Return to salon and also release a cable from the clamps located there on an arm of a steering column.
6. Tie up a piece of a string by the internal end of a cable and involve assembly in a motive compartment.
7. Untie a string, having left passed throughout the plug through passage in a partition of its motive compartment, and remove hummock assembly from the car.

1. Tie up the internal end of a cable to the string passed through a partition and involve assembly in interior of the car. Lay a cable along the former route and fix in all provided clamps and guides.
2. Fix the end of a cable in a connecting plate and install наместо the latch otpuskaniye lever.
3. Establish into place assembly of a heater (see the Head of the Cooling system, heating) and the dashboard (see Removal and installation of the dashboard).