Citroën Xantia

since 1993 release

Repair and operation of the car


Citroën Xantia
+ Introduction
+ Operation manual
+ Routine maintenance
+ Repair of the engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
- Body and finishing of salon
   Care of components of a body and bottom of the car
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Removal and installation of a front bumper
   Removal and installation of a rear bumper
   Removal, installation and adjustment of a cowl
   Removal and installation of a driving cable of an otpuskaniye of the lock of a cowl
   Removal and installation of locks of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and components of the lock
   Removal and installation of regulators of window regulators of door windows
   Removal, installation and adjustment of a door of a back and its telescopic emphasis
   Removal and installation of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive of door window regulators
   Removal and installation of door rear-view mirrors and the accompanying components
   Windshield, glass of a door of a back and the other fixed glasses - the general information
   The top hatch - the general information
   Exterior body finish
   Removal and installation of seats
   Removal and installation of seat belts
   Removal and installation of elements of internal finishing of salon
   Removal and installation of the central console
   Removal and installation of the dashboard
   Control body sizes
+ Onboard electric equipment
+ Schemes of electric equipment

04d84ca1


Removal and installation of the central console

Removal

 PERFORMANCE ORDER

1. Transfer a control lever a suspension bracket to situation "Maximum", then disconnect a negative wire from the battery.
2. Disconnect driving cables of the parking brake from supports of brake mechanisms of forward wheels (address the Head the Brake system), then lift as it is possible above a control lever the parking brake in interior of the car.
3. At the corresponding complete set remove an armrest from the central console.
4. At the corresponding complete set accurately release a small ware box from a forward part of the console.

5. On the models equipped with system of an immobilization of the engine release from the console the control panel of an immobilizator for the purpose of ensuring access to forward fixing screws.

6. Open an ashtray in a back part of the central console and release it from fixing clamps.

7. Take a small ware box from the top part of the console.

8. At the corresponding complete set accurately hook and take from the console switches of management of functioning of the electric drive of window regulators and a hydroactive suspension bracket of the car. Disunite contact sockets of the corresponding electrical wiring. Try to remember an order of connection of wires.
9. Release from the dashboard and remove a forward ashtray from the car.
10. On models with RKPP release a protective cover of the lever of gear shifting from the top part of the console. Release a clamp and remove a cover from the lever.
11. On models with AT release a protective cover and facing of the indicator of provisions of the lever of the selector from the console.

12. Turn out two lobbies and two back fixing screws and shift assembly of the central console back.

13. On the models equipped with system of an immobilization of the engine release a clamp and disunite the contact socket of an electrical wiring of the control panel of an immobilizator. Having disconnected an electrical wiring, remove the panel.

14. Lift the central console and, removing it from the selector lever, take from interior of the car.

Installation

Installation is made upside-down.


On the homepage