Citroën Xantia

since 1993 release

Repair and operation of the car


Citroën Xantia
+ Introduction
+ Operation manual
+ Routine maintenance
+ Repair of the engine
+ Cooling systems, heating
+ Power supply system and release
- Engine electric equipment
   - Systems of start and charge
      Diagnostics of malfunctions of electric equipment
      Check of a state and battery charging
      Removal and installation of the rechargeable battery
      Check of serviceability of functioning of system of a charge
      Removal, installation and adjustment of a tension of a belt of the drive of the generator
      Removal and installation of the generator
      Dismantling and assembly of the generator, check of a condition of internal components
      Check of serviceability of functioning of components of system of start
      Removal and installation of a starter
      Check of serviceability of functioning and repair of a starter
      Removal and installation of the switch of ignition
      Removal and installation of the sensor switch of a control lamp of pressure of oil
      Removal and installation of the sensor of level of motive oil
      Removal and installation of the sensor of temperature of motive oil
   + System of ignition - petrol models
   + System of preheat - diesel models
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and finishing of salon
+ Onboard electric equipment
+ Schemes of electric equipment

04d84ca1


Removal and installation of the sensor of level of motive oil

The sensor is installed on a forward wall of the block of cylinders, to the right of an oil filter.

Removal and installation of the sensor are made also as well as for pressure sensor switch (see Removal and installation of the sensor switch of a control lamp of pressure of oil). Access to the sensor is most convenient from under the car.



On the homepage